5
1
2
4
3
5
x
©
Guldmann
G
B
/U
S
-1
51
5/
08
/0
9
•
#
550536
©
Guldmann
G
B
/U
S
-1
51
5/
08
/0
9
•
#
550536
Mounting .the .feet .
Mount the feet (pos. 1) in pairs by means of
a transverse bolt (pos. ). The borings on the
transverse bolt must face the pointed screws.
Position the support posts (pos.3) in the
grooves (pos.4) of the feet. The top bracket
must be positioned perpendicular til the feet.
Join the feet and the support posts
by tightening the pointed screws
on the sides of the feet with
a 5 mm Allen key (pos.5).
Connecting .the .charging . .
liner .connector
Insert the output wire from
the transformer through
the cut-out section in the
foot (see figure above)
and pull it up through the
support post and out of
the triangular hole at the
top of the bracket. Then
insert the wire back into
the bracket through the nearest
hole.
Mount the charging liner connector
(pos. x) on the wire by clamping
the two stripped ends under the
cylindrical pins (one under each)
pressed into the black ferrule.
2 .
3 .
