3
©
Guldmann
G
B
/U
S
-1
51
5/
08
/0
9
•
#
550536
©
Guldmann
G
B
/U
S
-1
51
5/
08
/0
9
•
#
550536
1 .00 .
Purpose .and .use
1 .01 .
Manufacturer
V. Guldmann A/S
Graham Bells Vej 1-3A
DK-800 Århus N
Tel. + 45 8741 3100
Fax + 45 8741 3131
1 .02 .
Purpose .and .use
Purpose
Pontus free-standing rail systems – the single rail system, item no. 550371 and
the room-covering system, item no. 55037 – are two non-stationary systems.
The Pontus rail systems are employed with the Guldmann hoist. They can be
installed practically anywhere and require no mounting on walls, ceilings or
floors.
The Pontus systems will satisfy the requirements for transferring elderly and
disabled people in places like hospitals, rest homes, institutions and private
homes.
1 .03 .
Important/precautions
Read the entire user´s manual prior to assembly and prior to the Pontus
system being put into operation.
Pontus should be installed and taken down by no less than two persons.
The Pontus’ maximum load of 50 kg must
not
be exceeded.
In the case of damages to the Pontus system, discontinue use.
Pontus is purpose-built for lifting people.
Pontus should be installed on a plane surface.
Pontus must not be used for any other purpose than that stated in the user´s
manual; that is, neither as a playground or a swinging device.
1 .04 .
Lifters .made .by .other .manufacturers
Only hoists from Guldmann may be applied in the Pontus system.
Guldmann is not liable for defects or accidents caused by the application of
hoists/lifting modules made by other manufacturers.
1 .05 .
Unpacking .and .preparation
Visual .inspection .of .the .free-standing .rail .system:
If the packaging is damaged on receipt, the components of Pontus should be
carefully checked for noticeable imperfections, defects or flaws.
If damage is suspected, Pontus should not be assembled/employed until the
Pontus system has been approved by qualified service staff or the Guldmann
Service Team.
•
•
•
•
•
•
•
