Guldmann GHZ Series User Manual Download Page 22

Page: 22 / 28

Safety

Emergency stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes

Emergency lowering device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes, electrical

Control of lifting strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes

Cut-off angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10° along the rail

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45° across the rail

Electronics

On/off . . . . . . . . . . . . . . . . . . . . . . . . . . .Automatic when used. Soft start/stop

Overload protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic

Low battery protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V DC, 0.83 A

Supply voltage, transformer . . . . . . . . . . . . . . . . . . . . .100-240 V AC, 47-63 Hz

Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V NiMH

SWL: 255 kg (560 lbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 Ah

Continuous operation with short time loading with

3 hours without recharging . . . . . . . 10/90 % (2 min. operation/18 min. pause)

Max number of lifts in series with:

85 kg (187 lbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55/1000 mm

SWL: 255 kg (560 lbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21/1000 mm

Max charging time at 25ºC (77ºF):

SWL: 255 kg (560 lbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 hours

Operating temperature . . . . . . . . . . . . . . . . . . . . . . . 10°C - 35°C (50°F - 95°F)

Degree of protection against harmful ingress of liquids (water)

Lifting module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP 20

Hand control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP 44

Charging station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP 20

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP 20

8.00

EC-Declaration of conformity

The products are manufactured in compliance with the Council Directive

93/42/EEC of 14 June 1993 – with amendments, as medical device class 1.

Summary of Contents for GHZ Series





























Search results

Summary of Contents for GHZ Series

Reviews:

Related manuals for GHZ Series

Brands by name

Popular brands

Guldmann GHZ Series, User Manual

Search results

Summary of Contents for GHZ Series

Reviews:

Related manuals for GHZ Series

Brands by name

Popular brands