28
comply with EN ISO 17665;
2.The highest sterilization temperature is 138 ° C;
3.The sterilization time is at least 4 minutes at a temperature of 132 ° C / 134 ° C and
a pressure of 2.0 bar ~ 2.3 bars.
4.Allow a maximum sterilization time of 20 minutes at 134 °C.
Verification of the fundamental suitability of the products for effective steam
sterilization was provided by a verified testing laboratory.
Note:
a)Only products that have been effectively cleaned and disinfected are allowed to be
sterilized;
b)Before using the sterilizer for sterilization, read the Instruction Manual provided by
the equipment manufacturer and follow the instructions.
c)Do not use hot air sterilization and radiation sterilization as this may result in
damage to the product;
d)Please use the recommended sterilization procedures for sterilization. It is not
recommended to sterilize with other sterilization procedures such as ethylene oxide,
formaldehyde and low temperature plasma sterilization. The manufacturer assumes
no responsibility for the procedures that have not been recommended. If you use the
sterilization procedures that have not been recommended, please adhere to related
effective standards and verify the suitability and effectiveness.
*Fractional pre-vacuum procedure = steam sterilization with repetitive pre-vacuum.
