17
3.3.2 Spray-head and handpiece cleaning
① Remove the handpiece of the air poishing gun, unscrew the spray-
head and pull out it, as shown in Figure 10;
② Aim the air gun at the nozzle and blow out the powder inside the
nozzle;
③ Use an air gun to blow the front and rear ends of the handpiece to
clean the remaining moisture on the handpiece.
④ If the nozzle is blocked, please use the needle to clear it.
Figure 10 Schematic diagram of handpiece cleaning
Summary of Contents for AP-H
Page 1: ...Dental Air Polishing Handpiece ...
Page 5: ...5 Figure 1 Schematic diagram of structure ...
Page 29: ......
