Customer Helpline
0333 3201989
15
1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH?
The forward/reverse rotation control, which is on top of the trigger, is positioned in the
lock function. Unlock the forward/reverse rotation control by putting it into the required
rotation position. Push the trigger and the drill will start to rotate.
2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED. WHY?
Verify the torque position of the torque adjusting ring, you can find the torque-adjusting
ring between the chuck and the drill body. Position 1 is the lowest torque (screw driving
force) and position 18 is the highest torque (screw driving force). Position is for drill
operation. Regulate the torque adjusting ring to a higher position to reach the best result.
3. I CANNOT FIT THE BATTERY INTO THE BATTERY CHARGER. WHY?
The battery can be inserted into the charger only in one direction. Turn the battery around
until it can be inserted into the slot.
4. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES
Charging time problems, as above, and having not used a battery pack for a prolonged
time will reduce the battery pack working time. This can be corrected after several charge
and discharge operations by charging & working with your drill. Heavy working conditions
such as large screws into hard wood will use up the battery pack energy faster than
lighter working conditions. Do not re-charge your battery pack below 0
o
C and above 45
o
C
as this will affect performance.
Trouble Shooting