Customer Helpline
0333 3201989
10
A
B
B
C
D
a
b
c
E
F
J2
H
Operating Instructions
2. INSTALLING AND REMOVING THE BATTERY PACK (SEE FIG B)
a) TO REMOVE THE BATTERY PACK
Press the Battery Pack Release Button (8) firmly first and then slide the Battery Pack
out from your tool.
b) TO INSTALL THE BATTERY PACK
Slide the fully charged Battery Pack onto the tool with sufficient force until it clicks
into position.
3. ON / OFF SWITCH (SEE FIG C)
Press the On/Off switch (a) to start and release it to stop your drill.
The on/off switch (a) is fitted with a brake function which stops your chuck
immediately when you quickly release the switch.
It is also a variable speed switch that delivers higher speed and torque with increased
trigger pressure. Speed is controlled by the amount of switch trigger depression.
WARNING: Do not operate for long periods at low speed because excess heat
will be produced internally.