9
the window shows all available devices on your network
click to Change IP address to set new address according to network
administrator instructions. If your device is not listed, then click Help! My
device wasn’t found! Then follow the instructions. MAC address is on
product label. The device is factory set to IP 192.168.1.213.
•
gateway may not be entered if you want to use the device only in local network.
If you set the same IP address which is already used, the device will not work
correctly and there will be collisions on the network. If the device detects a
collision of IP address then reboot is performed automatically.
•
after changing IP address device is restarted and new IP address is assigned.
Restart of the device takes about 10 seconds.
•
connect to device using TSensor software and check the measured values. If
Web Sensor
AR004617
or Web Sensor
AR005351
values are not displayed, it’s
necessary
to find probes using button Search probes (Find probes).
•
set the other parameters (alarm limits, SMTP server, etc.). Settings are saved
after click on button Save changes.