6
Getting started
Here you can find information necessary to put newly purchased equipment to
operation. This procedure is only informative.
What is needed for operation
To install the unit you need to the following equipment. Before installation check if it’s
available.
•
Web Sensor
AR003825
or Web Sensor
AR004617
, P8541
•
power supply adapter 5V/250mA (or compatible PoE splitter)
•
RJ45 LAN connection with appropriate cable
•
free IP address in your network
•
for Web Sensor
AR004617
one probe. For Web Sensor
AR005351
up to 4
temperatures
probes type DSTR162/C, DSTGL40/C, DSTG8/C or relative
humidity probe
DSRH
Mounting the device
check if the equipment from previous chapter are available
install the latest version of TSensor software. This software is used to all device
settings. TSensor software can be free downloaded from the manufacturer’s
website. Software can be also supplied on CD. Device configuration can be
made using web interface. For web configuration is not TSesnor software
necessary.
contact your network administrator to obtain following information for the
connection to the network:
IP address:
_____._____._____._____
Gateway:
_____._____._____._____
DNS server IP:
Netmask:
_____._____._____._____
_____._____._____._____
Chapter
2