GUILCOR AR003825 User Manual Download Page 16 | Manualshive

Page: 16 / 36

GUILCOR AR003825 User Manual Download Page 16

16

Modbus a Syslog protocols

ModbusTCP and Syslog protocol settings are configurable via menu Protocols. Modbus
server is enabled by default. Deactivation is possible via Modbus server enabled option.

Modbus port can be changed via Modbus port field. Syslog protocol can be enabled using
item Syslog enabled. Syslog messages are sent to IP address of the Syslog server - field

Syslog server IP address.

SNMP

For reading values via SNMP it is necessary to know password - SNMP read community.
SNMP Trap can be delivered up to three IP address - IP address of the Trap recipient.

SNMP Traps are sent at alarm or error state on the channel. Trap feature can be enabled by
option Trap enabled.

Time

Time synchronization with SNTP server can be enabled by Time synchronization enabled

option. IP address of the SNTP is necessary to set into SNTP server IP address item. List
of free NTP servers is available at www.pool.ntp.org/en. SNTP time is synchronized at UTC

format, and due to be necessary set corresponding time offset - GMT offset [min]. Time is

«
...
14
15
16
17
18
...
»

Summary of Contents for AR003825





































Reviews:

No comments