18
For basic temperature measurement, first ensure that a suitable temperature range is set and the image is in
focus. Two methods are available, dynamic real-time temperature measurement and static temperature
measurement
Dynamic real-time temperature measurement
It is to measure the temperature of real-time thermal image in this method.
There are two cursors on the live thermal image. One is always fixed in the centre of image; the other is
always tracing the hottest spot of the image. Under the live thermal image, two temperature values are
present on one side of the cursors.
There are several analyses for real-time thermal image: spot analysis, line analysis, area analysis, isotherm
analysis and etc. These will be introduced in farther below.
Static Temperature Measurement
This method is available when there is no menu displayed in frozen or saved thermal images.
Keep the camera steady when you have the image in focus or choose and open a saved image. Analysis the
temperature measurement via the spot, line, area function in the tool bar. The detailed introduction is
farther below
Adjusting temperature range of frozen/ saved image
Temperature range of a frozen or saved image can be changed as well to adjust the image quality when frozen or
replay the thermal image.
Image zoom
When there is no menu displayed in live thermal image, move the joystick up or down to adjust focus and left or
right to zoom in or out the image continuously, with the current magnification shown in the zoom bar under the
image. TP9 is available for x2, x4, x8 zooming.
