Guide THERMOPRO TP9, User Manual

Page: 27 / 44

27
Maximum, minimum, and average temperature
funct
ion can be set in the menu.

To move the area, use the touch pen to drag the area Centre to the desired position and release. The
temperature of area selected will change with the area moving.

change the size of a selected area: click one of its four corners with stylus, drag the corner to the desired
position and then release it

Areas can be set to display the Maximum, Average or Minimum temperature. This is done by setting the
value of sub-option Area Function in option Analysis under submenu Parameter.

Delete the selected area by clicking .

Press C to exit and return to infrared image.
Isotherm Analysis

Isotherm analysis highlights the areas with same temperature in same color.

Isotherm Analysis can be performed on live images.

In live images, enter the main menu, select option Isotherm under submenu “File” to activate this
function.

In frozen images, bring up the frozen toolbar and choose the icon Isotherm analysis to activate this function.

In saved images, bring up the frozen toolbar and choose the icon Isotherm analysis to activate this function.

After entering Isotherm Analysis, there will be two icons on the right palette used to show the
temperature range that needed to be analyzed. Drag these icons by stylus to analyze in different scenes.

Temperature range is shown in the status bar on below of the screen.

There are three isotherm colors to choose from. This is done by setting the value of sub-option IsoColor in
option Analysis under submenu Parameter

Press C to exit and return to infrared image.
Infra Fusion Analysis
In live image mode, click icon in toolbar to enter infra fusion menu. Infra fusion transparent percentage
and distance can be set.
Parameter submenu

Camera setup parameters can be set for the camera. Click the icon menu at the right top corner of the
screen with the stylus to bring up the main menu and then click the submenu Parameter. Or press the
joystick to bring up the main menu and move the joystick up or down to select the submenu Parameter.