Installing Counterweights
When the weights of the camera and lens are not distributed evenly, the balance cannot
be adjusted. Adding counterweights can adjust the centre of gravity.
The counterweight kit is made up of 3 large counterweights (326g each), 3 small
counterweights(155g each) and 1 weight connector.
The weight connector is locked to the specialized quick-release plate via 2 M4*12 cylindrical
screws. The counterweights can be installed directly via the 5 1/4'' screw holes under the
weight connector. At the bottom of the counterweight, there is also a 1/4'' screw hole. This
allows for the counterweights to be connected to one another.
Installation of the counterbalance is generally not required.