Gude High Wheeler ST 510 EV, Instructions Manual

Page: 39 / 48

35
ST 510 EV ENGLISH
GB
Inspection and maintenance plan
Regular servicing period Before
any start-
up
After 1
month
After 3
months
After 6
months
After 12
months
After 24
months
5
Hours of
operation
25 Hours
of opera-
tion
50 Hours
of opera-
tion
100 Hours
of opera-
tion
250 Hours
of opera-
tion
Engine oil
(10W-40)
Inspection 
Change  
Air filter Inspection 
Change 
Spark plug Inspection
Clean

Change 
Battery Inspection

Charging
25

Before winter storage, disconnect the ignition wire from the battery. Connect it before starting.
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified hours of
operation have expired.
Defects searching
Defect
Causes Measure
The motor does not start Start-Stop lever has not been pressed Press the Start-Stop lever
Choke has not been used Use the choke
Lack of fuel Add some fuel
Bowden cables are too long Adjust the Bowden cables using the
coupling nut.
Wrong fuel, storing without petrol tank
being drained
Drain the fuel tank and carburettor.
Add fresh petrol.
Sooted spark plug (carbon residues on
electrodes), electrodes distance too big
Clean the spark plug, check the plug ther-
mal value, possibly change the plug, set
the electrodes distance to 0.6-0.7 mm
The spark plug is wet from petrol
(oversaturated engine).
Dry the spark plug out and refit it.
Grass is not collected
Blocked channel
Full collection bag
Too wet grass Clean the ejection channel
Empty the collection bag
Cut in dry weather
Automatic feed is not
working
Bowden cables are too long Adjust the Bowden cables using the
coupling nut.