Expert
Power
Control NET
8x
6
7
Expert
Power
Control NET
8x
To enter the configuration menu, click on „Configuration“ on the
upper left side of the screen.
Configuration - Power Ports
Label
A name with a maximum of 15
characters can be entered here for
each Power Port.
After power-up switch
The Power Port’s switching state
after a power-on of
EPC NET 8x
can be defined here (
on, off, re-
member last state
).
If switching on after power-up,
wait ...
A switching delay of a Power Port can be defined here that is
applied after switch on of
EPC NET 8x
. The delay can last up to
8191 seconds.
Figure 5 Configuration - Power
Ports
