Expert
Power
Control NET
8x
18
19
Expert
Power
Control NET
8x
Now the Power Ports can be switched on and off per number
keys. By pressing
c
you can check the network configuration
and by pressing
Esc
you can log out (
see fig.16
).
Figure 16 Serial interface Switching
4.4 Temperature sensor
Connect the temperature sensor with the TEMP connector at
the front of the device. If it is connected exactly, the recent tem-
perature is displayed in the login window (Figure 4 and 13), in the
switching window (Figure 14) and can be requested via SNMP.
The temperature sensor can be ordered as additional supplies.
More information can be found at
www.gude.info
or requested at
.
Figure 17 Temperature sensor
