Expert
Power
Control NET
8x
10
11
Expert
Power
Control NET
8x
Configuration - SNMP
Enable SNMP-get
Here you can activate SNMP-get
protocol of
EPC NET 8x
.
SNMP public community
Here you can enter the SNMP
public community.
Enable SNMP-set
Here you can activate SNMP-set
protocol of
EPC NET 8x
.
SNMP private community
Here you can enter the SNMP private community.
Download SNMP-MIB
Here you can download the MIBs of
EPC NET 8x
.
Configuration - SNMP Trap Receiver List
Enable Traps
Here you can activate SNMP-traps. if enabled, EPC NET 8x will
dispatch SNMP-traps to all receivers listed. Receivers have to
be listed as follows: IP address (and, if necessary the HTTP
port) e.g.:
192.168.0.2:8000
Trap Version
Here you can choose between SNMP-traps standard 1 and 2c.
Use SNMP only if your network is fitted for.
More information about the SNMP functions of
EPC NET 8x
,
you can find in chapter 3.5, on
http://www.gude.info/wiki
or ask
our support team.
Figure 10 Configuration - SNMP
