GÜDE 83810, Original Operating Instructions

Page: 8 / 56

GB
Please read carefully the following Operating Instructions before putting the machine into operation.
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Pictures just for illustration purposes! This document is the original Operating Instructions.
Marking
Product safety:
Product corresponds to
appropriate EU standards
TÜV Rheinland
Proven safety
Commands:
Keep the Operating
Instructions
Use protective glasses and
headphones!
Protective gloves to be used!
Prohibitions:
Warning against hand injury
Protect against wet and
moisture
No pulling the cable
Warning:
Warning against dangerous
voltage
Keep safe distance
Warning against flying items
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Packing cardboard material
may be delivered to
collection centres for
recycling.
Any defective and/or disposed
electric or electronic
appliances must be delivered
to appropriate collection
centres.
Protect against moisture
Caution - fragile
This side up
Interseroh
Technical specifications:
Connection Engine output
Engine speed
Bandsaw blade pulley
diameter
Bandsaw blade length Table size
Weight
Supply includes
Please check whether the following parts are included:
- 1 machine table
- 1 mitre stop
- 1 parallel stop
- 1 standard bandsaw blade
- 1 table insert
- 1 Allen key
- 1 flat key
- 4 lock ring screws
- 1 countersunk head and washer screw
- 1 Operating Instructions
The band saw should be mounted to a massive work
station or work-table if possible. For that, use holes in the
machine legs.
Check the parameters of your electrical network with those
given on the machine. The voltage and frequency should
be identical, not exceeding 240 V/60 Hz.
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on
the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as
device overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations and
assembly manual, and normal wear and tear.