Guarantee
A warranty period of 12 months applies to commercial
use and 24 months apply to private use and commences
on the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as
device overload, violent use, damage caused by third
party or foreign materials, failure to comply with
operations and assembly manual, and normal wear and
tear.
General Safety Instructions
It is necessary to read these operating instructions before
first use of the machine. If there are any doubts as far as
machine connection and handling are connected please
contact the manufacturer (servicing department).
IN ORDER TO ENSURE HIGH SAFETY LEVEL
PLEASE FOLLOW THESE INSTRUCTIONS
CAREFULLY:
Attention: Operate with current protector only!
ATTENTION!
Keep your workplace clean and tidy.
Disorder at
the workplace and on the work-table increases risk
of accident and injury.
Pay attention to conditions of environment you
are working in.
Do not use electric tools and
devices in a humid or wet environment. Ensure
sufficient lighting. Do not expose electric tools to rain
or high air humidity. Do not switch the electric tools
on in environments with flammable liquids or
inflammable gases.
Do not allow unauthorised persons to get to the
machine.
Keep visitors and spectators, especially
children and handicapped persons, in a safety
distance from your workplace.
Ensure safe storage of tools.
Tools and equipment
you do not need must be stored at an elevated
place, if possible, so that they were not accessible to
unauthorised persons.
Always use correct equipment for all works.
Do not use e.g. small tools or accessories for works
that need to be executed by heavy equipment. Use
tools solely for purposes for which they have been
designed. Do not overburden the device!
Pay attention to the electric cable.
Do not pull the cable. Pull the connector plug only
when pulling out of socket. Protect the cable against
heat sources, oil and sharp edges.
Prevent from unintentional switching on.
Make always sure the switch on the device was in
the off position before connector plug is plugged in.
Use special extension cables at outdoor works.
For outdoor works you need special extension
cables suitable for such works and with appropriate
marking.
Stay concentrated at all times. Pay attention to
what you are doing.
Use common sense. Do not use the electric
equipment when you are tired.
Pay attention to damaged parts.
Check the device
before use. Are any parts damaged? In case of
small damage please consider whether the device is
really capable of perfect and safe working.
Protect yourself against electric shocks.
Prevent any contact of your body with earthed objects, e.g.
water piping, heating elements, cookers and fridges.
Use approved parts only.
Always use only identical spare
parts at maintenance and repairs. Spare parts are available
in an authorised service centre.
Warning!
Any use of accessories and extensions not explicitly
recommended in these operating instructions may result in a
threat to persons and objects.
Safety Instructions for First Putting the Machine into
Operation
The appliance can lead to occasional voltage fluctuations
under unfavourable power conditions.
The appliance is only designated to be used for connection
points not exceeding the maximum allowed impedance of
Z
max
= 0,233 Ω.
As a user, you must make sure your connection point on
which you want to use the appliance meets the above-
mentioned requirements
– after agreement with your
electricity supplier if necessary.
Always pull the connector plug out of socket before machine
adjustment or maintenance.
Children are prohibited to operate the machine.
After packing removal check whether the device and all its
parts are in a perfect condition.
Always wear protective glasses and hearing protection
aids
Always wear protective glasses and corresponding sight and
hearing protection aids. Never aim with compressed air
beam at your body or other persons or animals. Impurity
may be accelerated to a great extent by air flow and thus
become a dangerous shot.
Always use protective equipment against electric shock
Never use the compressor near water or in a humid
environment.
Put properly the compressor out of operation
Disconnect the compressor from power source and release
all pressure from the air jet before repair, inspection,
maintenance, cleaning or replacement of construction parts.
Unintentional switching on
Do not transfer the compressor when connected to power
source or when the air jet is under pressure. Before
connecting the compressor to power source make sure the
pressure transducer switch is in the OFF position.
Proper compressor storage
When the compressor is not in use it is necessary to
disconnect it from power source, store it at a dry place
protected against climatic influences. Keep it out of reach of
children.
Working clothes
Do not wear wide clothes or jewellery as they can get caught
by machine parts.
Careful compressor maintenance
It is necessary to follow the lubrication instructions (see
the throat for oil adding and oil level inspection in the
"Handling" chapter).
It is necessary to follow instructions concerning
protective cover in the air filter described in the
"Handling" chapter.
Check regularly the power cord. If damaged it needs to be
repaired or replaced in the service repair centre. Make sure
14
