19
EN
Technical Data
Welder
SG 120 A
Art. No
20070
Degree of protection
IP 21S
Insulation class
H
Mains voltage U
1
230 V
Mains frequency
50 Hz
Maximum rated input current I
1max
13,5 A
Maximum effective input current I
1eff
4,7 A
Max. input
230 V ( 3,2 kVA )
Protection, time delay
16 A
No-load voltage U
0
31 V
Idle state power
18 W
Efficiency of the Welding Power Source
65%
Load voltage U
2
45 A / 16,25 V
90 A / 18,5 V
max. Welding current
230 V ( 90 A )
Regulated section Welding current I
2
45 A - 90 A
Number of switching steps
2
Switching steps
45 A + 90 A
Duty cycle at max. electricity X *
( 230V )
45A / 60 %
90 A / 10 %
Material thickness
1,5 - 5 mm
Wire thickness (Steel)
0,9 mm
Max. wire consumption at max. power and max. wire feed
0,9 mm Wire
58,5 g/min
Flux cored electrode welding
Yes
Dimensions L x W x H
400 x 185 x 305 mm
Net/gross weight
14 kg / 15,74 kg
This device consists of the following recyclable materials:
Sheet steel, Copper, Aluminum, , ABS, PE
* The ratio of given duration time/the full-cycle time.
Note 1: This ratio shall be within 0~1, and can be indicated by percentage.
Note 2: In this standard, the full-cycle time is 10 min. For example, if the duty cycle is 60 %, the load-applying
time shall be 6 min and the following no-load time shall be 4 min.
Switch-on time determined at 40°C using simulation
You can find all the technical documents required in the Ecodesign Regulation
2019/1784 at:
https://www.guede.com/cgi-bin/twinklecom.cgi?contentidx=0¶m=PAGE&tid=GSC-Ersatzteile-
Online-Shop&setartfocus=20070
ENGLISH
