Inspection Log
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE.
Date of First Use: __________________.
Product lifetime is indefinite, as long as it
passes all pre-use and Competent Person
inspections. User must inspect prior to
EACH use.
Product inspection and revalidation must
be done in accordance with table below.
This inspection log must be specific to one
Guardian SRL. Separate inspection logs
must be used for each Guardian SRL. All
inspection records must be made visible
and available to all users at all times.
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
U
SA
ph
on
e:
(
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
5
Inspection Requirements for Self-Retracting Devices
Good storage
conditions, indoor or
infrequent outdoor use,
room temperature,
clean environments.
Type of Use
Application
Examples
Example
Conditions of Use
Worker Inspection
Frequency
Competent Person
Inspection Frequency
Product Revalidation
Frequency
Fair storage conditions,
indoor and extended
outdoor use, all
temperatures, clean or
dusty environments.
Harsh storage
conditions, prolonged
or continuous outdoor
use, all temperatures,
dirty environments.
Infrequent
to light.
Moderate to
heavy.
Severe to
continuous.
Rescue and
confined space,
factory
maintenance.
Transportation,
residential
construction,
utilities,
warehouse.
Commercial
construction, oil
and gas,
mining, foundry.
Before each
use.
Before each
use.
Before each
use.
Annually (12 months).
Semi-annually
to annually
(6-12 months).
Quarterly to
semi-annually
(3-6 months).
At least every 5 years but
not more than intervals
required by the
manufacturer.
At least every 2 years but
not more than intervals
required by the
manufacturer.
At least annually but not
more than intervals
required by the
manufacturer.
IMMEDIATELY remove from service if Diablo SRL does not function properly, or if exposed to forces of fall
arrest.
Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,
cracking, and hazardous materials. Ensure that selected work area will support the application-specific
minimum loads set forth in this instruction manual. Work area MUST be stable.
Competent Person inspections MUST be recorded in inspection log in instruction manual and on
equipment inspection grid label. The Competent Person must sign their initials in the box
corresponding to the month and year the inspection took place.
During inspection, consider all applications and hazards Guardian SRL has been subjected to.
Inspection
(cont’d)
