Guardian Telecom Inc.
Installation and Operation
Model AS-VR16
Page 6
Installing the AS-VR16
•
Inspect the product for shipping damage.
•
Follow all appropriate electrical codes and use only approved electrical
fittings for the installation.
Tip: If the product is
damaged, notify the
carrier immediately.
•
Install the unit into the rack.
•
Ensure that none of the electrical circuits are live.
Tip: Two rack units are
required
•
Terminate wiring and phone line connections
•
Power up unit
•
Check power pilot light for turn-on status.
Operation
Front Panel Record Switch:
The front Panel Record switch will provide recording of a voice message through the
microphone mounted on the front panel. To record a message using the Panel Record switch,
press the switch until the LED lights up. Speak closely into the microphone while holding the
switch. Release the switch to stop recording.
Front Panel Play Switch:
The front panel Play Switch will provide playback of a previously recorded voice message
through the panel mounted speaker. To play back the recording, press and release the switch.
The recorded message will be played back to the end of message. While playing back the
message the play LED will be on to the end of the message.
Remote Recording:
Once the Record on the back panel terminal is connected to Record Enable –
(contact closure), the AS-VR16 will start to record the audio signal sent to the Page Audio +/-
input. While recording, the front panel record LED and a remote Control Console LED (if
equipped) will be on. Release Record Enable contact closure to stop recording.
Phone Line Playback:
Call on the phone line extension that is connected (assigned) to the AS-VR16 T/R connectors.
The AS-VR16 will auto answer the call. The playback of the recording to the phone line will
start and the front panel Playback LED will go on. When the playback reaches the end of
recorded message the phone line will be released and playback LED will go out.
