Guardian Telecom
VoIP Telephones
Setup & Configuration
Page 32
Web Page Item
Description
Autoprovisioning
Disable Autoprovisioning:
When this option is enabled, the device will try to fetch an
autoprovisioning file from a remote server.
Autoprovisioning Server:
Enter the IPv4 address of the provisioning server in dotted
decimal notation.
Autoprovisioning Filename:
Enter the Autoprovision file name that was generated with the
Setup parameters.
Use tftp:
If using TFTP (instead of http) to download autoprovisioning files
click the box.
Username:
The username used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
Password:
The password used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
Autoprovisioning autoupdate
(in minutes):
The reoccurring time (in minutes) the device will wait before
checking for new autoprovisioning files. Enter up to 6 digits. A
value of 0 will disable this option.
Note
: To use the auto update options, enable the
Set Time with
NTP Server on boot
setting on the
Device Configuration Page
page.
Autoprovision at time (HHMMSS):
The time of day the device will check for a new autoprovisioning
file. The time must be 6 characters in length and in HHMMSS
format. An empty value will disable this option.
Note
: To use the auto update options, enable the
Set Time with
NTP Server on boot
setting on the
Device Configuration Page
page.
Autoprovision when idle
(in minutes > 10):
The idle time (in minutes greater than 10) after which the device
will check for a new autoprovisioning file. Enter up to 6 digits. A
value of 0 will disable this option.
Note
: To use the auto update options, enable the
Set Time with
NTP Server on boot
setting on the
Device Configuration Page
page.
Infinite Retries (Not Recommended)):
Selected will try to get the AutoProvisioning file from provisioning
server until the file is loaded.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the device.
Table 9 - Autoprovisioning Configuration Parameters
