Guardian Telecom
VoIP Telephones
Setup & Configuration
Page 16
Current Time
Current Time in 24 hour format
(HHMMSS):
Allows you to input the current time manually. (6 character limit)
Current Date (MMDDYY):
Allows you to input the current date manually. (6 character limit)
Set Clock
Clicking on this button will immediately set the clock format.
Miscellaneous Settings
Disable HTTPS (NOT
recommended):
Disables the encrypted connection to the webpage. Depending on network security
enable / disable as required.
Auto-Answer Incoming Calls
:
When this option is enabled the device will automatically answer incoming calls. When
the handset is on hook, the call will be established using the hands free speaker and
microphone.
Backlight On
:
This option sets the normal state of the backlight after the device has booted.
This button will play an audio test message and can be used to test the volume level.
When this button is pressed the device will record 3 seconds of audio, beep, and then
play back the recorded audio. This can be used to test the microphone gain level.
This button will activate the relay for the DTMF activation Duration (in seconds).
When this button is toggled, it will put the device into button test mode. In this mode,
the handset or hands free speaker will play an audio file when a button is pressed on
the device. For normal keypad input (keys 0-9) it will speak the associated file from the
audio configuration page. For the other keypad keys, (*, #, any other function keys) it
will play a DTMF tone while the button is depressed. The button press mode will time
out after 60 seconds.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the device.
Table 4 - Device Configuration Parameters
