26
Touch SETTING icon
on Main Menu to enter SETTINGS interface, then touch DEVICE
CONFIGURATION, then touch DOOEBELL LIST. Touch the Door Station you want to change the settings,
touch MODIFY, input password and # to enter MODIFY interface. Then you can set all parameters for the
door station.
10.1 Device Name(Door Station Name)
Please Refer to 9.42.
10.2 Device NO.
The full DEVICE NO. for door station is 8 digits, you can set as you want. But if there are more than 1 door
station in the system, it’s not allowed to set 2 door station with same device no.
10.3 Button Address(Set Calling Target)
The default BUTTON ADDRESS is 1, and the default ROOM ADDRESS in the monitor is 1 too. So you can
call directly to the indoor monitor after installation.
But if you have changed the ROOM ADDRESS in the monitor, you need to set calling target the button of the
door station too.
Operation way:
Touch BUTTON ADDRESS 1, set a ROOM ADDRESS you want to call. After setting, you can call to the
monitors with this room address by pressing the call button on the door station.
Remark:
If the BUTTON ADDRESS does not set as same as the ROOM ADDRESS of the target monitor, the monitor
can monitor the door station, but the door station can not call to the monitor.
10.4 Private Device
If enable this function, this door station can be set as a private device for one family. The private door station
can only be monitored by this family, and it can only call to this family.
10.5 Monitor
If enable this function, the door station can be monitored by indoor monitors. If disable this function, the door
station can not be monitored by indoor monitors.
10.6 Set the Doorbell Unlock Parameters
10.61 Monitor Unlock
If enable this function, you can unlock the door or gate at monitoring state by touching UNLOCK icon. If
disable this function, you can only unlock the door or gate at talking state by touching UNLOCK icon.
10.62 Door Lock State
If you connect a door lock to the system, you need to enable this function, and set
UNLOCK TIME
for it. Also
you need to set UNLOCK SIGNAL TYPE(NORMAL OPEN or NORMAL CLOSE) according to door lock type.
