4 / 13
P/N MAINST-GUARDALLPIR
• REV 1.0 • ISS 15MAR21
Wiring and EOL selection
The device allows you to wire to control equipment in
several different ways. To aid wiring and inspections of
cable termination the terminal block can be tilted forwards
or removed entirely.
EOL wiring is considered the most secure. The example
shown assumes you are connecting to a Premier Elite
control panel. For other wiring types, please refer to the
manufacturer’s instructions for your equipment.
The O/C position can be used for other wiring types,
including use of resistor values which are not included on
the device Terminal block identification.
Terminal block identification
1. + to Aux 12V
2. - to Aux 0V
3. A - Alarm
4. B - Alarm
5. C
– Tamper
6. D
– Tamper
7. RLED can be used to control the LED for walk
testing.
Terminal block
RLED terminal
The RLED (Remote LED) terminal can be used to control the
LED for walk testing from the panel.
To use the RLED feature put switch 1 in the up position
which will disable the LED. When an output is triggered 0V
is applied to the RLED terminal which will enable the LED.
Mode selection
G2 all models
This is the default state for optimum catch performance
and false activation immunity. Switch 2 and the lens
obscuration slider should be in the down position.
•
GP15 15m @ 90° compliant to EN50131-2-2,
INCERT and PD6662
•
GQ20 20m @ 90° compliant to EN50131-2-2,
INCERT and PD6662
•
GD20 20m @ 85° compliant to EN50131-2-4,
INCERT and PD6662
Summary of Contents for GCD
Page 8: ...8 13 P N MAINST GUARDALLPIR REV 1 0 ISS 15MAR21 Guardall GQ20 G2 Coverage Pet Coverage ...
Page 9: ...9 13 P N MAINST GUARDALLPIR REV 1 0 ISS 15MAR21 Guardall GD20 G2 Coverage Pet Coverage ...
Page 10: ...10 13 P N MAINST GUARDALLPIR REV 1 0 ISS 15MAR21 Guardall GCQ DO NOT USE Guardall ...
