C
Guangzhou ZHIYUAN Electronics Stock Co., Ltd.
CANScope Analyzer User Manual
CANScope
©2012 Guangzhou ZHIYUAN Electronics
Date: 2012/09/03
User Manual
V1.01
2
Alligator clip: CAT II 300V / Max 15A
Test probe: CAT III 1000V / Max 10A
WARNING
If user uses the test suite in anyway other than those specified by Guangzhou
ZHIYUAN Electronics Stock Co., Ltd.; the protection of the test suite may be
weaken. Do not use a damaged or broken test lead probe for measurement, it
may result in damage to instrument or personnel injury.
1.1.2 Power supply connection
The rated values and limits of the CANScope power adapter:
(Input) I/P: 100~240V / 50-60Hz, 0.55A
(Output) OI/P
：
12V, 2A
。
WARNING
To avoid damage to instrument and the risk of electric shocks, and to ensure
there is an appropriate voltage supply to the instrument, please use the power
adapter and cable provided by Guangzhou ZHIYUAN Electronics Stock Co., Ltd.,
or a national standard power adapter and cable. Also to avoid damage to
instrument and the risk of electric shocks, please ensure that the instrument has
a good grounding connection.
After confirming the power supply voltage, user can connect the power cable to the
instrument and push the power button down and hold it to turn it on. Once the power is
connected, the red PWR LED on the instrument will light up first, keep holding the
button down until the instrument give out two beeps, it means that the instrument is fully
on; user can then run the PC software and perform measuring works.
