MANUAL DE MONTAGEM KIT PPK NO
DJI PHANTOM 4 ADV/PRO
7
Av. Paulo VI, 1952 (novo n 184) • Sumaré • CEP 01262
-
010 • São Paulo • SP
(11) 4800-
3157 • www.guandalinibr.com
2.1.5.
STEP 5
Position the control module in the center of the drone, aligning the marking that exists
on the control module with the line of the central axis of the drone, as shown in Figure
12 and Figure 13. Soon after, 1 nylon clamp should be inserted (Figure 14) in each arm
of the control module (Figure 15) and wrap it around the drone arm. When wrapping,
be sure to tighten the tapes together so that the control module is in the center, as
shown in Figure 16.
Attention!
Tighten the nylon clamp just enough so that the kit does not move. If too tight, it can break.
Figure 12 - Marking for alignment of the control module with the drone.
Figure 13 - Correct positioning of the control module in relation to the drone.
