Operating Instructions
13
5.3 DIN Rail Transmitter
Fig. 11: Dimensions of DIN Rail Transmitter
6. Operation
As the dust travels in the duct, it has kinetic energy. When the dust strikes the sensor rod, this energy
transform to static energy. A resultant coulomb charge builds up. This charge is processed to give a dust
burden reading.
After power up the ProSens starts measuring using factory setting.
The commissioning with PME can be done optionally with the touchscreen or with the configuration-
software. For the DIN Rail Transmitter, only PC configuration is possible.
The menu structure and numbering is identically for the touchscreen as well for the PC software. Therefore
the detailed description is valid for both versions. Variations from this will be explained separately.
6.1 Basic Operation of the PME-Touchscreen
To enter the configuration menu press the touchscreen in the upper, right section for a few seconds.
The main menu will appear displaying the firmware version and as well four operating buttons on the right
side of the screen.
- upwards button
- downwards button
- C button (in some parts of the menu named E button)
- enter button
To navigate through the menu use Up- or Down-button, to enter another level press Enter button. To leave
one level or to finally leave the configuration menu press C button (cancel), as well for leaving a particular
selection. In some menus this may be named E button (escape).
ProSens-BA-EN-2015-01-29.indd 13
30.01.15 12:31
