29
1
ON
2
3
4
15
CHARGING
POWER
STATUS
RF
PULL-PUSH
MODE1
MODE2
LOCK/BEACON
OFF
120
MIN
MAX
STALL FORCE
CLOSE TIME
SET
LIMIT
LEARN
REMOTE
AUX OUT
SOLAR
PANEL
18VAC
RECR
GRN
BL
K
RED
EXI
T
SAFET
Y
EDGE
CY
CL
E
COMMO
N
LINK
Wires from Non-Contact Sensor
Refer to the sensor manufacturer’s instructions for information
about installing these devices on a vehicular gate.
Make sure the power switch to the opener is turned
off before connecting safety device wiring to the
terminal blocks. Unplugging the transformer does
not turn power to the opener OFF.
Non-Contact Sensor Connection:
Connect one of the non-contact sensor dry contact output wires to
the
COMMON (COM)
terminal and the other to the
SAFETY
terminal on the Mighty Mule® 350 control board.
This input is ONLY monitored when the gate
is closing. Activating the non-contact sensor
(obstructing the safety beam path) will cause the
gate to reverse to the fully open position.
Non-Contact Sensors (photo beams)
The Mighty Mule® 350 can also accept "Safety" input from normally open "dry-contact" output devices such as photo beams
connected to the SAFETY input terminal.
If not installing a non-contact sensor skip to next section.
PLEASE NOTE:
Non-contact sensors are not
included with
the Mighty Mule® 350.
Exit Loop
If not installing a shadow loop skip to next section.
Refer to the sensor manufacturer’s instructions for information
about installing these devices on a vehicular gate.
Make sure the power switch to the opener is
turned OFF before connecting safety device
wiring to the terminal blocks. Unplugging the
transformer does not turn power to the opener
OFF.
Free Exit Connection:
Connect one of the free exit wires to the
COMMON
terminal and the other to the
EXIT
terminal on the Mighty
Mule® 350 control board.
A FREE EXIT device or loop that senses a vehicle as
it approaches the gate from inside the property and
automatically opens the gate to allow the vehicle to exit.
PLEASE NOTE:
Non-contact sensors are not
included with
the Mighty Mule® 350.
1
ON
2
3
4
15
CHARGING
POWER
STATUS
RF
PULL-PUSH
MODE1
MODE2
LOCK/BEACON
OFF
120
MIN
MAX
STALL FORCE
CLOSE TIME
SET
LIMIT
LEARN
REMOTE
AUX OUT
SOLAR
PANEL
18VAC
RECR
GRN
BL
K
RED
EXI
T
SAFET
Y
EDGE
CY
CL
E
COMMON
LINK
Wires from Exit Loop or Device
