rev 03.21.13
Installation Manual for the
Slide Gate Operator System
PROFESSIONAL INSTALLATION RECOMMENDED!
WARNING!
This equipment is similar to other gate or door equipment and meets or
exceeds Underwriters Laboratory Standard 325 (UL 325). However, gate
equipment has hazards associated with its use and therefore by installing this
product the installer and user accept full responsibility for following and noting
the installation and safety instructions. Failure to follow installation and safety
instructions can result in hazards developing due to improper assembly. You
agree to properly install this product and that if you fail to do so Gates That
Open, LLC, (“GTO”) shall in no event be liable for direct, indirect, incidental,
special or consequential damages or loss of profits whether based in contract
tort or any other legal theory during the course of the warranty or at any time
thereafter. The installer and/or user agree to assume responsibility for all
liability and use of this product releasing Gates That Open, LLC, from any
and all liability. If you are not in agreement with this disclaimer or do not feel
capable of properly following all installation and safety instructions you may
return this product for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before
attempting to install and use this automatic gate operator. This gate operator
produces a high level of force. Stay clear of the unit while it is operating and
exercise caution at all times.
All automatic gate operators are intended for use on vehicular gates only.
This product meets and exceeds the requirements of UL 325, the standard which
regulates gate operator safety, as established and made effective March 1, 2000,
by Underwriters Laboratories Inc.
For more information on the GTO/ACCESS SYSTEMS full line of automatic gate
operators and access controls visit our website at www.gtoaccess.com.
©2012 Gates That Open, LLC
Printed in China for Gates That Open, LLC.
, LLC
®
GPX-SL25
GPX-SL25
PROFESSIONAL RESIDENTIAL
ACCESS
SYSTEMS
DO NOT
INSTALL THIS OPERATOR WITHOUT
SAFETY EDGES AND ROLLER GUARDS!
