5
Push Button Control (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16
gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM345)
The Pin Lock
substitutes for the clevis pin at the front end of the
GTO/PRO® 3000XL gate operator.
Helps prevent theft of the operator from the gate, while allowing quick release of the operator.
Key Chain Two Button Transmitter (RB742)
The Key Chain Mini Transmitter is a miniature version of the
GTO/PRO® entry transmitter and has
the same adjustable code settings. 12 Volt battery included.
Single Button Transmitter (RB741)
The GTO/PRO®
entry transmitter, with adjustable code settings, is standard equipment with all
GTO/
PRO®
systems. 12 Volt battery included.
Digital Keypad (F310)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be
programmed to use up to 25 different personal identification number (PIN) codes. Each code is face
programmable with additional security features built in. Wired installations require 16 gauge, low
voltage, multi-stranded, dual conductor, direct burial wire
(RB509) (sold separately). Requires 3 AA
batteries (not included).
Mounting Post (F100) - In Ground
This black powder coated pedestal is designed to provide convenient access to your keypad, wireless
intercom, or other access control device from your vehicle. With its break down design it is easy to
install and works well in most standard applications. Surface Mount Flanges (F102) and Extensions
(F103) for added height are available.
GTO/PRO 50' Exit Wand (FM139), 100' Exit Wand (FM140), 150' Exit Wand (FM141)
The GTO/PRO®
Exit Wand is designed for residential and agricultural applications and is compatible
with all GTO/PRO® automatic gate operator models. The wand is an electromagnetic sensor, which
offers 'hands free' operation of the
GTO/PRO® Gate Operators with a 12 ft. radius of detection of
vehicles in motion.
Automatic Gate Lock (FM144)
A
MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically as
gates open and close. Used with GTO/PRO®
DC swing gate operating systems for maximum stability
and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long. Ideal for
animal enclosures or high wind areas.
Wireless Entry Intercom / Keypad (F3100MBC)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows
owner to give up to 25 programmable entry codes to family, friends or approved delivery personnel.
Codes can be permanent of temporary. Can be wireless up to 500 feet or hard wired up to 1000 feet.
Additional base stations available (F3101MBC).
Other GTO/PRO
Access Controls and Accessories
AUT
OMA
TIC
GAT
E LO
CK
1
2 3
4
5 6
7
8 9
0
