background image

7

If you have any questions please call the GTO Service Department:

(850) 575-0176

Limited One Year Warranty:

GTO, Inc. • 3121 Hartsfield Road • Tallahassee, Florida 32303 • (850) 575-0176 • Fax (850) 575-8912 • www.gtoinc.com

GTO, Inc., gate opener accessories are warranted by the manufacturer against defects in workmanship for a period of one
(1) year from the date of purchase, provided recommended installation procedures have been followed.

In the case of product failure due to defective material or manufacturer workmanship within the one (1) year warranty
period, the accessory will be repaired or replaced (at the manufacturer's option) at no charge to the customer, if returned
freight prepaid to GTO, Inc. 3121 Hartsfield Rd., Tallahassee, FL 32303.

IMPORTANT: Call (850) 575-0176 or Fax (850) 575-8950 for a Return Goods Authorization (RGA) number before
returning accessory to factory. Products received at the factory without an RGA will not be accepted. Replacement or
repaired parts are covered by this warranty for the remainder of the one (1) year warranty period or six (6) months,
whichever is greater.  GTO, Inc. will pay the shipping costs (equivalent to United Parcel Service ground rate) for items
repaired under warranty.

The manufacturer will not be responsible for any charges or damages incurred in the removal of the defective parts for
repair, or for the reinstallation of those parts after repair. This warranty shall be considered void if damage to the product(s)
was due to improper installation or use, connection to an improper power source, or if damage was caused by lightning,
wind, fire, flood, insects, or other natural agent.

After the one (1) year warranty period, GTO, Inc. or one of its authorized service centers will make any necessary repairs
for a nominal fee. Call GTO at  (850) 575-0176 for more information. This warranty gives you specific legal rights, and
you may also have other rights which may vary from state to state. This warranty is in lieu of all other  warranties,
expressed or implied. NOTE: Verification of the warranty period requires copies of receipts or other proof of purchase.
Please retain those records.

Lock Board

12 Volt Battery

Strain Relief

Double Spade
Connectors

Operator 
Control 
Board

RE

D

& B

LACK PAIR FROM LOCK

(PRO 2000)

BLA

CK

RED

R
E

D

B
L

A

C
K

WHI

TE

15

15

RED

BLK

GRN

ORG

BL

U

RED

BLK

GRN

WHT

BL

U

ORG

GRN

RED

BLK

GRN

ORG

BL

U

RED

BLK

RED

BLK

FIRST OPERATOR

SECOND OPERATOR

POWER IN

ACCESSORY GTO RECEIVER

15 amp

15 amp

PRO 2000 Board
Terminal Blocks

TRANSFORMER

SOLAR

REDRED

BLACKBLACK

GREENGREEN

ORANGEORANGE

BLBL

UEUE

RED

BLACK

GREEN

ORANGE

BL

UE

Power Cable

from First Operator

RED Wire To Battery

Positive (+) Terminal

RED Wire From Lock 

BLACK Wire From Lock

WHITE Wire to

BLACK on Operator Terminal

BLACK Wire To Battery 

Negative (–) Terminal

1 2 3 4 5

Lock Board

The 3M

®

 Scotch Loc Connector is not needed with the GTO/PRO 2000

control board. Connect the WHITE wire from the lock board directly to
the OPENER terminal block along with the power cable wire. Connect
the WHITE wire to the BLACK terminal for Pull-to-Open installation
(see illustration), connect WHITE wire to the RED terminal for Push-to-
Open installation.  Proceed to Step 5 and connect the remaining wires as
described.

Summary of Contents for Automatic Gate Lock









Reviews: