PWG-600 User Guide
- 51 -
shown.
Incoming:
Bars all incoming call when this option
is set to “On”
Outgoing:
Bars all outgoing call when this option
is set to “On”
•
Caller ID:
When set to “On” it shows the caller phone
number.
•
DTMF:
DTMF is short for “
Dual Tone Multi Frequency
”.
Select DTMF and press “Select” key. The following
submenus are displayed.
Inband
: Select “Inband” if the person you are
calling supports PSTN network only.
Outband
: Select “Outband” if the person you are
calling linked to a VoIP server.
•
Prefix Dial:
Enable or disable prefix dialing using this option.
A prefix dial number can be set after prefix dialing is
enabled.
c. Profiles:
Ten default profiles are provided. Default0~Default9.
Select a default profile and press the “Select” key. The following
options are displayed.
•
Default0~Default9:
o
User Number:
Sets the phone number of the VoIP
extention and may be use for authentication purposes
with the VoIP Server.
o
Authentication Name:
Sets the authentication name for
authentication purposes with the VoIP Server.
o
Password:
Sets the password for authentication
purposes with the VoIP Server.
o
Registrar:
Sets the
VoIP Server Registrar address
o
Domain Name:
Sets the VoIP Server Domain name
address
o
Outbound Proxy:
Sets the VoIP Server outbound proxy
address
o
Mail Addr:
Sets the VoIP Server mail address
o
Edit Profile Name:
Select this option to assign a user-
friendly name to the profile.
o
Activate:
Select “Activate” and press the “Select” key if
you want to make the selected profile active.
o
Restore Defaults:
Select this option to restore the
original settings for the selected VoIP profile.
