PWG-600 User Guide
- 38 -
1. Select “Search” and press the “Select” key.
A contact list screen is displayed. Key in the first letter of the saved
contact with the phone number. The alphabet ‘ABC’ are displayed at the
bottom. This indicates that the alphabet keys can be used to search the
contact. To enter numbers, press ‘
#
’ until the “ABC” is changed to “123”
and vice versa.
2. After the contact has been found, press the “Options” key or press the
“Back” key to go back to the phonebook list. The following options are
available:
a. Edit Contact
b. Delete Contact
c. Assign Speeddial
d. Unassign Speeddial
3. Select “Edit” and press the “Select” key.
4. Enter the name and press “Next” key.
5. Enter the phone number and press “Next” key to save the contact.
Messages
Using the SMS service (Short Message Service) you can send and receive text
messages.
Writing and sending a message
To send a message:
1. From the desktop, press the “Menu” key.
2. Navigate to the “Messages” menu icon using the “Navigational” keys and
press the “Select” key.
3. The following submenus are displayed when you selected “Messages”
a. Write New SMS
b. Incoming SMS
c. Sent SMS
4. Select “Write New SMS” and press the “Select” key.
5. Type the SMS using the key pad and press the “Next” key after you’ve
completed the SMS.
Note: Below are the keys that could be useful during SMS operation.
•
The maximum number of characters per SMS is set at 160 and the
remaining characters will be shown as you type the SMS.
•
Press and hold down the “Clear” key for a few seconds to clear off
any characters on the screen.
•
Press the “#” key to toggle the big, small or number alphabets
•
Press the “*” key to toggle extra characters like comma,
multiplication symbols, dollar sign, percentage sign etc.
