GTEK PWG600, User Manual

Page: 48 / 70

PWG-600 User Guide
- 48 -
enter and shall match the ID on the designated
access point that you want to connect to on the
WiFi network.
o
Auth. Protocol
ƒ
Off
ƒ
SIM1 based
ƒ
SIM2 based
ƒ
EAP-MD5
ƒ
EAP-MSCHAPv2
•
Encryption: Select “Encryption” and press the
“Select” key to configure the following parameters.
o
Protocol: Select any of the following options
and press the “Select” key.
ƒ
Disable
ƒ
64 bit Open
ƒ
128 bit Open
ƒ
64 bit WEP
ƒ
128 bit WEP
o
WEP Key: Select this option, key in the WEP
encryption key and press the “Select” key .
ƒ
Key #1 ~ Key #4
Note: Please consult your network administrator for more
information on setting up the network security of your PWG-600
device.
•
Advanced: Select “Advanced” and press the “Select”
key to configure the following parameters.
o
Power Saving:
ƒ
On : Turning this option to “On” enables
power saving mode and prolongs the
battery consumption during WiFi
operation.
ƒ
Off : Turns off power saving mode during
WiFi operation.
Note: Setting the power saving to “On” will
enable power saving mode only if the access
point supports power saving mode.
o
RTS/CTS Threshold: Select this option and
key in the RTS/CTS threshold setting and
press the “Select” key.
o
Frag Threshold: Select this option and key in
the frag threshold setting and press the
“Select” key.