25
Repairing the perimeter wire
If the perimeter wire gets cut or breaks for any
reason (indicated by solid red light on charge
station), you need to locate and repair it.
You will need to use one of the splicing clips
provided. First take up the slack in the wire so
there is some overlap.
The clip has two channels in it. Push one end
into one channel and the other end into the
other. The wire needs to go right in, and can
even protrude from the other end.
Close the cover of the clip until it clicks
securely in place. You will then need to ensure
the clip does not protrude on your lawn and
risk being cut by the mower, by embedding it
in the soil.
Taking a pair of pliers, crimp the metal tab onto
the inserted wires. This will form a connection
between the wires.
When the perimeter wire is repaired the charge station will display a solid blue light. If the light is
still red there are more breaks in the loop, which will need locating and repairing.
4719_Robot_Mower_manual_aw3.indd 25
4719_Robot_Mower_manual_aw3.indd 25
20/04/2021 16:22
20/04/2021 16:22