10
Min 2m
Min 30cm
Find a location with access to power,
ensuring the mower can leave the charge
station in an anti-clockwise direction. Don’t
peg the plate down yet.
The location of the charge station should be
flat and secure, without risk of movement, if
placed next to a border edge that is unstable
it can slump and cause the station to be
uneven, this will cause problems for the
mower when returning to charge.
The location must be within 5m of a safe
power source – either a weatherproof
outdoor electrical socket or an indoor
power point in a garage, for example.
Ensure a minimum of 2m straight
perimeter from the front of the
charge station, and 30cm straight
from the rear.
Safe power source
Installing the charge station
The boundary wire goes
into the front (1) of the
charge station and comes
out at the back (2).
It will emerge at the rear of
the unit (2).
WARNING:
Trailing wires are a trip hazard. Take care when choosing your location.
Push the boundary wire into
the tube at the front (1) of
the charge station.
2
2
1
1
4719_Robot_Mower_manual_aw3.indd 10
4719_Robot_Mower_manual_aw3.indd 10
20/04/2021 16:22
20/04/2021 16:22
