Gtech eSCENT Operating Manual Download | Manualshive

Page: 40 / 52

background image

40

Maintenance

Place the frame upside down on a flat surface, resting on the saddle and the handlebars. You may
need to put something down on the surface to stop your bike frame from getting scratched.

Lift the chain and pull back the derailleur and
align the wheel.

Attaching the rear wheel

Make sure the disk falls into the caliper.
Make sure that the arrows on the Anti-Rotation
Spacers are facing down and that the wheel falls
into the drop out.

Place the frame upside down on a soft, flat
surface, resting on the saddle and the handlebars.

Re tighten the main wheel bolts.

The recommended tightening torque is 40Nm.

«
...
38
39
40
41
42
...
»

Summary of Contents for eSCENT





















































Reviews:

No comments

Related manuals for eSCENT

Brand: Ignite Pages: 44

Brand: X-TREME Pages: 39

Brand: Nipponia Pages: 44

Brand: Segway Pages: 3

Brand: Shoprider Pages: 14

Brand: AREBOS Pages: 8

Strider bootie 3

Brand: Days Pages: 20

Brand: Xiaomi Pages: 6

Brand: Gilera Pages: 92

Brand: Messingschlager Pages: 24

Build-A-Scooter 577

Brand: Radio Flyer Pages: 4

Brand: Radio Flyer Pages: 6

Brand: NAVEE Pages: 36

ROCKRIDER E-ST500

Brand: Decathlon Pages: 52

Brand: Go-Ped Pages: 4

Brand: Golden Pages: 29

Brand: Shoprider Pages: 20

Brand: Muuwmi Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands