Gtech eSCENT, Operating Manual

Page: 3 / 52

3
• Do not abuse the charger cord. Never carry the
charger by the cord.
• Do not pull the cord to disconnect from a
socket; grasp the plug and pull to disconnect.
• Don’t wrap the cord around the charger
when storing.
• Keep the charger cord away from hot surfaces
and sharp edges.
• Do not handle the charger with wet hands.
• Do not store or charge the appliance outdoors.
• The charger must be removed from the socket
before removing the battery, cleaning or
maintaining the appliance.
Battery Safety:
• This appliance includes Li-Ion batteries;
do not incinerate batteries or expose to high
temperatures, as they may explode.
• Shorting the battery terminals may cause burns
or fire.
• Do not place battery pack on wet or metallic
surfaces.
• When you dispose of the appliance remove
the battery and dispose of the battery safely in
accordance with local regulations.
• You must always use the battery in accordance
with the instructions on the battery label.
• Liquid ejected from the battery may cause
irritation or burns.
• Leaks from the battery cells can occur under
extreme conditions. Do not touch any liquid
that leaks from the battery. If the liquid gets
on the skin wash immediately with soap and
water. If the liquid gets into the eyes, flush them
immediately with clean water for a minimum
of 10 minutes and seek medical attention.
Wear gloves to handle the battery and dispose
of immediately in accordance with local
regulations.
Brake Safety:
• Regularly check your brakes for signs of wear
and tear. Any worn parts must be repaired or
replaced immediately.
• Be careful while getting used to the brakes.
Practice emergency stops in a place clear of
traffic until you are comfortable controlling your
eBike.
• Wet weather reduces your braking power and
the grip of the brakes. Reduce your speed and
be aware of longer stopping distances when
cycling in wet conditions.
• Braking on unpaved surfaces will differ. Be sure
to practice braking on different surface types.
• Ensure that braking surfaces and brake pads
are free of wax, grease and oil.
• Do not pedal and brake at the same time as
this will cause excessive wear.
Maintenance:
• Many parts on your eBike are subject to a
higher degree of wear due to their function
and depending on their use. Have your eBike
checked regularly at a professional bike shop
and have any worn parts replaced.
• After an accident or crash you must take your
eBike to a bike repair specialist to make sure
that it is safe to ride. Be aware that damage
may not be visible. Failure to do this may result
in serious injury.
• Any form of crack, scratches or change of
colouring in highly stressed areas indicate
that the life expectancy of the part has been
reached and it should be replaced immediately.
• Ensure the battery is removed from the bike
before carrying out any maintenance.
• Make sure that all screws and bolts are
tightened securely and to the prescribed
tightening torques before riding.
• You must always use genuine replacement
parts when performing maintenance on
your eBike.
• Regularly check the tyre pressures
(minimum 30psi, maximum 50psi) and regularly
check the tread depth of tyres.
Chain Maintenance:
• Chain rings and disc rotors are extremely sharp
and care should be taken to ensure hands are
kept clear during cleaning process: The chain
will require cleaning and lubricating regularly.
To clean the chain, turn the bike upside down
and firmly hold a damp rag around the chain.
Rotate the crank arms until the chain looks
clean. Use degreaser if necessary and rinse.
Apply chain oil until the surface of the chain has
a thin, even coverage.
• Gtech do not recommend that a trailer is used
with this product.