Gtec SATURN, Installation And Use Manual

Page: 101 / 294

101
P
OWER REDUCTION FOR
200/208V
PHASE
-
NEUTRAL LOADS
In case the output voltage is set to 200V or 208V PHASE-NEUTRAL (see the “Configuring the UPS” paragraph), the maximum
power output of the UPS is reduced compared to its nominal value, as shown in the diagram below:
C
ONFIGURING THE
UPS
Configurations which can be modified by the user from the control panel are listed in the table below.
FUNCTION DESCRIPTION DEFAULT POSSIBLE CONFIGURATIONS
Language*
Selects mimic panel
language language
English

English

Italian

German

French

Spanish

Polish

Russian

Chinese
Output voltage
Selects the rated output
voltage
(Phase - Neutral)
230V

220V

230V

240V
Buzzer
Selects the audible alarm
operating mode
Reduced

Normal

Reduced: does not sound due to the
momentary intervention of the bypass
Operating mode**
Selects one of five different
operating modes
ON LINE

ON LINE

ECO

SMART ACTIVE

STAND-BY OFF
Battery low **
Estimated autonomy time
remaining for “battery low”
warning
3 min.

1 ÷ 7 @1 min step
Date and time** UPS internal watch setup
* Press keys F1 and F4 simultaneously for t > 2 sec. and English will automatically be reset.
** Function modification can be blocked by means of the configuration software.