Gtec SATURN, Installation And Use Manual

Page: 102 / 294

102
Configurations which can be modified by means of configuration software available at service centres are listed in the following
table.
FUNCTION DESCRIPTION DEFAULT
Operating mode Selects one of five different operating modes ON LINE
Output voltage
Selects the rated output voltage
(Phase - Neutral)
230V
Output nominal frequency Selects the rated output frequency 50Hz
Autorestart
Waiting time for automatic power-on after the return of mains
voltage
5 sec.
Auto power off
Automatic UPS power-off in battery operation mode if the
charge is lower than 5%
Disabled
Buzzer Reduced Selects the audible alarm operating mode Reduced
EnergyShare off Selects the auxiliary socket operating mode Always connected
Timer Programmed UPS power on/off (daily) Disabled
Autonomy limitation Maximum battery operation time Disabled
Maximum load Selects the user overload limit Disabled
Bypass Synchronization speed
Selects the synchronisation speed of the inverter to the
bypass line
1 Hz/sec
External synchronization Selects the source of synchronisation for the inverter output From bypass line
External temperature Activates reading of the external temperature probe Disabled
Bypass mode Selects the mode of use of the bypass line
Enabled /
High sensitivity