GTE KMG-2000-G Manual Download Page 5

Page: 5 / 26

GTE Industrieelektronik GmbH



V3.2UK 2/19

KMG-2000-G

Page 5 of 26

3.1.

The KMG-2000 G force-measuring device is used for the routine, on-the-spot check-

ing of the closing forces on gates, e.g. following the installation of a new gate or for

the prescribed annual inspection of existing gates, with the result being recorded in

the inspection log book relating to each gate. It is possible to transfer the measured

values to a laptop or PC via the inbuilt USB interface which allows an accurate analy-

sis of the measured values to be carried out and any deviations from the set values

to be identified. The required software can be ordered as an extra.

3.2.

It is stipulated in EN 12453 and DIN 16005 that each force-measuring device must be

sent to the manufacturer at least once a year for the purpose of calibration and ad-

justment. He will then test that it is compliant and approve the device for use for an-

other year.

3.3.

The centrepiece of the KMG-2000-G contains an LCD display, on which all the

measured values, the force curves, the measured-value memory management func-

tion and user guidance are displayed.

•

Measured-Value Display

All 4 measured values that are relevant for standard purposes are displayed simul-

taneously for each individual measurement and, following the third individual

measurement, the 4 mean values.

Individual Measured Values

Mean Values

•

Measured-Value Memory Management Function

All measured values of the individual measurements, up to 500 in number, and the

mean values calculated in each case from 3 individual values can be brought up on

the display along with their graphic representations.

•

User Guidance

During the individual phases of the measurement process appropriate operating

advice is displayed, e.g.

Measurement

is calculated

Please wait

Fd :

325N

28/2

Fs:

51N

< F1

Fe:

> F2

Td:

40ms

Fdm : 275N

28/2

Fsm:

46N

< F1

Fem:

> F2

Tdm:

40ms

Summary of Contents for KMG-2000-G



























Search results

Summary of Contents for KMG-2000-G

Reviews:

Related manuals for KMG-2000-G

Brands by name

Popular brands

GTE KMG-2000-G, Manual

Search results

Summary of Contents for KMG-2000-G

Reviews:

Related manuals for KMG-2000-G

Brands by name

Popular brands