GTE Industrieelektronik GmbH
V3.2UK 2/19
KMG-2000-G
Page 19 of 26
Figure 4: Opening widths between the leaf of a hinged door and the counter closing edge
3.2.2.1
Measuring between the primary and the counter closing edges
3.2.2.1.1
Measuring points:
Measurement should be carried out at the height of
-
50 mm above the floor,
-
mid-way up the door leaf, or, at a height of 2500 mm above the floor,
where the height of the door leaf is greater than 5000 mm,
and
-
300 mm below the upper edge of the door leaf, or, at a height of 2500
mm above the floor, where the height of the door leaf is greater than
2800 mm,
and at the opening width of
-
50 mm
-
300 mm
and
-
500 mm between the door leaf and the counter closing edge facing the
leaf.
