PREPARATION FOR OPERATION
10
ADICOS HTL-2
410-2410-008 EN20
5 Preparation for operation
5.1 Removing dirt
DANGER!
Fire hazard due to deposits
Deposits in the test tube of the ADICOS HTL-2 (e.g. carbon dust) can ignite
during operation.
−
Clean the device before each use!
5.2 Charging the battery baton
Check charge status
Before you mount the SOLO 760 battery baton, you must check the charging
status of the batteries located inside.
−
If needed, charge the batteries according to the
manufacturer‘s instructions!
5.3 Mounting the battery baton
1
Insert the SOLO 760 battery baton into the HTL connection
element from below with the connection socket first until it
reaches the locking knob
2
Press down the locking knob and slide in the baton until it
makes contact
3
Twist the battery baton, exerting pressure, until it snaps into
place with an audible click
5.4 Mounting the telescope pole
1
Insert the SOLO 760 battery pole into the SOLO 100 telescope extension pole until it
reaches the locking knob
2
Orient the pole so that the free locking knob of the battery baton and the corresponding
engaging hole of the telescope pole are aligned
3
Press down the locking knob and slide in the pole until it clicks into place with an audible
click
KLICK!
