9
ADICOS HTL-2
410-2410-008 EN20
CONSTRUCTION AND FUNCTION
4.2 Function
In combination with the SOLO 760 battery baton from
the company
No Climb Products Ltd., ADICOS HTL-
2 makes it possible to easily trigger tests and check
the functions of ADICOS infrared detectors of the
type HOTSPOT in installation situations in industrial
equipment
.
For this purpose, its hot plate, which is regulated
to maintain a temperature of 100 ... 105 °C, is
pressed against the opcits of the HOTSPOT detec-
tor to be tested, meaning that the entire view range
of the detector sensor is homogenously stimulated.
4.3 Display and control elements
HTL control panel
Operating switch
The operating switch is located in the control
panel of the HTL-2 and can be used to turn the
device on and off.
Operating LED
The operating LED is located to the left above
the operating switch in the control panel. It
shines green when the HTL-2 is operated and
blinks when the battery is low.
Heating LED
The heating LED is located to the right above
the operating switch in the control panel. It
shines red when the heating function of the
HTL-2 is active.
