GTE ADICOS HOTSPOT-X0 Interface-X1, Operating Manual

Page: 7 / 18

5 HOTSPOT-X0 Interface-X1 410-2410-011 EN12
SAFETY INSTRUCTIONS
2 Safety instructions
The ADICOS HOTSPOT-X0 Interface-X1 ensures operational safety assuming proper installation,
commissioning, operation and maintenance. For this purpose, it is absolutely required to com-
pletely read, understand, and follow these instructions and the safety information contained.
WARNING!
Installation and operating errors can lead to fatal and severe injuries and
damage to the industrial system.
−
Read and follow this manual carefully!
2.1 Intended use
The ADICOS HOTSPOT-X0 Interface-X1 is intended for use with the ADICOS HOTSPOT-X0
Sensor Unit and is designated for the detection of fire scenarios in potentially explosive atmo-
spheres of zones 0, 1, and 2. It may be exclusively operated within ADICOS systems. In this
context, the operating parameters described in Chap. 8, »Maintenance« must be met. Any
deviating use requires prior consultation with the manufacturer.
Compliance with this manual as well as all applicable country-specific provisions is also part
of the intended use.
2.2 Standards and regulations
The safety and accident prevention regulations applicable for the specific application must
be observed during ADICOS HOTSPOT-X0 Interface-X1 installation, commissioning, mainte-
nance, and test.
The ADICOS HOTSPOT-X0 Interface-X1 also meets the following standards and directives:
Regulation Description
2014/34/EU ATEX Product Directive
1999/92/EG ATEX Operational Directive
DIN EN 60079-0:2012
IEC 60079-0:2011
Explosive atmospheres
Equipment - General requirements
DIN EN 60079-1:2014
IEC 60079-1:2014
Explosive atmospheres
Equipment protection by flameproof enclosures „d“
DIN EN 60079-11:2012
IEC 60079-11:2011
Explosive atmospheres
Equipment protection by intrinsic safety “I”