3
HOTSPOT-X0 Interface-X1
ABOUT THIS MANUAl
410-2410-011 EN12
1 About this manual
1.1 Objective
These instructions describe the requirements on installation, wiring, commissioning, and oper-
ation of the
ADICOS HOTSPOT-X0 Interface-X1
. After commissioning it is used as reference
work in the case of faults.
It is exclusively addressed to knowledgeable specialist personnel
(–› Chap. 2, Safety instructions)
1.2 Explanation of symbols
This manual features a continuous structure for best possible comprehension. Here, the follow-
ing labels are used.
Action objectives
Action objectives describe the result to be achieved by the subsequent instructions. Action
objectives are presented in
bold font
.
Action instructions
Action instructions describe the activities to be performed in order to achieve the action objec-
tive previously mentioned. Action instructions are presented as follows.
►
Individual action instruction
1
First of several sequential action instructions
2
Second of several sequential action instructions
3
etc.
Intermediate states
In the case of describable intermediate states or results, which are the result of action steps
(e.g. displays, internal function steps, etc.), are presented as follows.
Z
Intermediate state
Warning signs
This manual uses the following information types.
NOTE!
This information type provides information directly important for further
system operation.
Summary of Contents for ADICOS HOTSPOT-X0 Interface-X1
Page 18: ......
