GT POWER X2mini, Manual

Page: 6 / 16

16
· The charger and the battery to be charged should be set up on a heat-resistant,
non-flammable and non-conductive surface.
· Please ensure that the fan and vents of the charger are not blocked by the surface that it
is placed on.
· Make sure you understand the correct settings to use for the battery to be charged or
discharged. Use of incorrect settings may cause severe damage to the battery, including
possible fire or explosion.
· To avoid short circuit between the charge leads, always ensure the leads are connected
to the charger first and only then plugged into the battery. Always make sure that no
batteries are connected to leads before disconnecting them from the charger.
· You have to pay attention to verify the capacity and the voltage of the Lithium battery
pack. It may be composed of parallel and series connection mixed. In parallel link the
capacity of the battery pack is multiplied by the number of cells but the voltage remains
the same. That kind of voltage imbalance may cause a fire or explosion during charge
process. We recommend you compose the Lithium battery pack in series only.
The above warnings and safety note are particularly important, please follow the
instructions for a maximum safety, any improper operation may cause severe damage to
charger and batteries, including possible fire or explosion.