22
11. Load data setting
12. User setting
When you used it for the first time, it will operate according to the preset value. You can
modify parameters in the Settings column for the second time use.
This program calls back the data that was stored at 'Save
Data' program. To load the data, press
Start/Enter
key once
to blink the data number field and select the number using
INC
or
DEC
key then press
Start/Enter
key for more than 3
seconds.
As indicated, choose [01] NIMH, will show corresponded
value 14.4V3000MA
The automatic charging trigger voltage program is a kind of
program that can automatically turn off the charging current
during charging. The working principle is that after the
battery voltage increased to the maximum value and start to
decreasing then the charge current will turn off and finish
the charge. If the trigger voltage set too high, there is a
possible danger of over- charging .If the trigger voltage set
too low, may stopcharging prematurely. Please refer to the
specification of the battery (NiCd default voltage:12mv,
NiMH default voltage:7mv).
Automatic charging trigger voltage program
Temp cut-off program is used to protect charger being
damaged. Will trigger stop charge/discharge when in
extreme or high temperature environment. Temperature cut
off value can set from 60° to 80°.
Temp cut-off program
INC
DEC
INC
DEC
PROGAM SELECT
Load date
LOAD [1] NiMH
14.4V 3000mAh
Load...
Start
Enter
Start
Enter
NiMH Sensitivity
D.Peak Default
NiCd Sensitivity
D.Peak Default
INC
DEC
Temp Cut-off
ON 65°C 149°F
Summary of Contents for X2mini
Page 16: ......
